How To Change Battery In Hyundai Elantra Key Fob. You can get them just about anywhere (radio shack, walgreens). You can also use a butter knife or a coin.
Put in a new one and join the two parts of your key together. The only tool needed to access and replace the battery is a small flat head screwdriver or a small plastic pry bar tool. #6 · may 1, 2007.
Note That This Only Works On Hyundai Key Fobs That Have.
Hold down the “open” or “unlock” button on the keyless entry fob until the vehicle’s lights flash. Here’s how to program the hyundai key fob: Hold both the “unlock” and “open” boxes on your hyundai key fob.
These Instructions Should Help You Replace The Key Fob (Keyless) Remote Battery On Hyundai Elantra, Azera, Sonata, Genesis, Accent, Equus, Santa Fe, Sedona, Tucson, Veloster.
Use a coin or a flat blade screwdriver to pop open the key fob from the small notch or indent along the outside. The battery is a cr2032. If this process doesn’t work, make sure you’ve installed the battery correctly.
Also Know, How Do I Change The Battery In My Hyundai Tucson Key Fob?
Align the key fob case and close it by pressing the two halves together. If you have a brand new key fob. Begin by removing the metal key by pressing and holding the metal tab or button.
Cr2032 Coin Battery 🪙 You Need:
You can also use a butter knife or a coin. Your hyundai key fob should now be programmed, and you should be good to go. In order to change your hyundai car key battery, you will need to take the old battery out of the slot.
The Only Tool Needed To Access And Replace The Battery Is A Small Flat Head Screwdriver Or A Small Plastic Pry Bar Tool.
Get inside your vehicle and close all of the doors. Carefully lift the circuit board to expose the battery. A replacement coin, button or watch type battery for the key fob is part # cr2032 from a variety of manufacturers such as panasonic, energizer, sony, duracell, kodak, and maxell.