close
close
How To Drill Through Thick Porcelain Tile

How To Drill Through Thick Porcelain Tile

How To Drill Through Thick Porcelain Tile

How To Drill Through Thick Porcelain Tile. Drive anchors into holes and mount rod. Measure, mark with an x and then position the tape and.

How To Drill Through Thick Porcelain TileHow To Drill Through Thick Porcelain Tile
How to Drill Porcelain Tile Still Keeping It Intact Industrial Drill Bit from industrialdrillbit.com

Keeping some water handy while you are drilling porcelain tiles or, for that matter, any tile is a good idea because when you are drilling holes in the tiles, the drill bit against the tile produces a lot of friction, hence a lot of heat. Start at the lowest setting of the variable speed dial on your drill. Use a guide or template for ultimate accuracy.

Measure And Mark The Area.

If the tile is cracked, you'll need to replace it before you continue. While that sounds expensive, a ¼ inch diamond tipped tip costs under $20, and a carbide bit of the same size can be had for less than $10. For porcelain tiles i would only recommend using diamond bits, as porcelain tiles are really hard.

It Is Important To Maintain.

In drilling through tiles safely, using the appropriate drill bit is very important. Slow and steady wins the race. This will keep the drill from walking on you.

Expect To Spend Three To Five Minutes Per Hole, Although It Can Take Longer.

Dip the rag in the water and use it to disperse water onto the bit. Follow the five rules below for a step by step guide on how to drill tiles: Buying guide for best drill bit porcelain tile in 2022.

Do Not Apply Too Much Pressure As This Could Cause Cracking.

Start slowly at first until drill bit begins to dimple in the tile then you can speed up. Now, that’s a big problem. Wait around 30 seconds while applying more water.

See also  See Through Clothes Camera App Iphone

Let The Drill Bit Do The Work.

After allowing your bit to cool, you can continue drilling. After that, affix it to the electric drill. The first thing you have to do before you get in with all the practical work is to mark your porcelain tiles.

Leave a Reply

Your email address will not be published.