How To Get Water Out Of Charging Port Android. Wipe down the device with a dry, absorbent towel. First of all, you need to turn off your phone.
Move the switch to the right to enable show system apps, then tap ok. This should take between two to four hours. Then gently shake the device to force moisture and water droplets to fall out.
If You Try To Connect Your Phone Or Tablet To The Charger While The Charging Port Is Wet, You Will Hear An Alarm Go Off With Steps To Disconnect The Charger.
Rubbing the swab in the port can get the tiny cotton dust particles inside. Then gently shake the device to force moisture and water droplets to fall out. It can absorb the moisture from the phone’s charging port, which will lead to a dry environment for the phone.
Press Down On The Nozzle For 1 To 2 Seconds To.
Open device settings and type ‘android system‘ in the search box. Press and hold the volume up key and the bixby key, then press and hold the power key. To get the water out, use a toothpick or a paper clip to remove any debris that might be blocking the port.
If Using Compressed Air, Make Sure You're Holding The Can Upright To Avoid Getting Water Inside The Port.
Gently shake the device to help remove water or moisture from the port. In case it does then the problem could be caused by an app you downloaded. Turn off your phone asap.
Power Off Your Samsung Phone And Plug In The Charging Pin.
Generally, phones don't die because of water, but because the water causes a short in the wiring. Don't just turn off the screen; Doing so will rule out the possibility of a damaged usb port.
First Of All, Try Using A Different Usb C Type C Cable To Charge Your Phone.
Most samsung tablets are not water resistant. If that guide doesn’t help you out, replacing the charge port should get you back into business. Sweep the toothpick around the inside of the port to loosen up any dust, then give the phone a shake to make it fall out.