How To Light A Pilot On A Water Heater. To properly light the pilot, first turn off the gas to the water heater. The most obvious indicator that a pilot light has gone out is the one that everyone dreads:
How to light a water heater pilot light. To properly light the pilot, first turn off the gas to the water heater. Keep the knob or pilot button pressed down as you relight the burner with a utility lighter.
Press And Hold The Control Knob To Let The Gas Flow Into The Pilot Light.
Some water heaters have a separate button for pilot mode, usually a red one, which you’ll press and hold. Assess the type of pilot ignition. This will ensure the pilot remains lit.
It’s Possible That You Need To Remove The Access Panel.
Even if you’ve replaced the thermocouple, it is still possible that the thermocouple is not functioning properly. The below video will demonstrate how to light your water heater pilot light. The most obvious indicator that a pilot light has gone out is the one that everyone dreads:
February 17, 2022 By Allison Hayes.
Tips and tricks on how to light your rv water heater!www.tricityrv.com While still holding the gas down, light that pilot. You can find it on the gas valve’s handle, underneath the burner compartment panel.
On Some Water Heaters, The Lowest Setting Is Labeled For Pilot Lighting.
In case the water heater pilot light doesn’t stay lit, it is possible that the thermal switch is either damaged or tripped. Hold down the reset button and bring a grill lighter or long match to the pilot light valve until the pilot ignites. Dial or rotate the gas control knob to the pilot position.
How To Light A Water Heater Pilot Light.
I got lucky and it. Let go of the pilot knob or button. Turn the valve to the “pilot” position.